news

How to connect the lithium battery, protection board? Please listen to what HOPPT BATTERY said.

July 8, 2020

How to connect the lithium battery, protection board? Please listen to what HOPPT BATTERY said.

 

The lithium battery protection plate is the charge and discharge protection of the lithium battery in series.


When fully charged, the voltage difference between individual cells is less than the set value (usually ±20 mV), effectively improving a single cell's charging effect in the battery pack.


Simultaneously, overvoltage, Undervoltage, overcurrent, short circuit, and overheating of each battery in the battery are detected to protect and extend the battery life.


Undervoltage protection prevents over-discharge damage to the battery during the discharge of each cell.

 

The finished lithium battery is mainly composed of two parts, the lithium battery core, and the protection plate. The lithium battery core is primarily composed of the positive plate, diaphragm, negative plate, and electrolyte.


Positive plate, diaphragm, negative plate winding or lamination, packaging, perfusion electrolyte, packaging into a core, the lithium battery protection plate's role is not known to many people, the name of the lithium battery protection plate is the protection of lithium battery.
The lithium battery protection plate's role is to protect the battery. Still, discharge but can charge, but can flow, and has the output short-circuit protection function.

 

The connection of the lithium battery protection plate

 

There are two ways to design lithium-battery protection plates.


They are positive and negative plates.


The principle and purpose are the same.


However, the device does not support software setup for correction and negative plates, so only physical correction is possible.


At the same time, the software used varies.


The following describes how to connect and operate the two protection panels.

 

Several wiring methods of lithium battery protection plates introduced.

 

The standard protection plate used to connect the battery protection plate is only the negative pole identical plate, the negative pole isolation plate, and the positive pole identical plate.


It's No other methods described in detail.


Details are as follows:

 

1. The connection method of the negative plate. Please refer to the following table for the connection order.

 

Several wiring methods of lithium battery protection plates introduced.

 

2. Please refer to the following table for the connection mode and order of the negative plate.

 

Several wiring methods of lithium battery protection plates introduced.

 

3. Please refer to the following table for connection mode and order of positive plate.

 

Several wiring methods of lithium battery protection plates introduced.

 

In this process, when testing non-standard battery devices, there are many ways to connect the battery protection plate. However, it is worth trying the intimate connection.


The simple process is as follows:

 

1. Place the device on a relatively horizontal desktop and adjust its smoothness to make it stable;

 

2. Ensure that the equipment's humidity is within the range of 30% to 50%, and it is easy to cause shell leakage and electric shock accidents under high humidity;

 

3. Access the appropriate power supply (AC220V / 0.1a), open the primary device's power button, and open the corresponding power module button

 

4. Check whether the equipment can be displayed correctly and tested regularly.

 

Connection method of lithium battery protection plate

 

Some lithium-ion batteries have a third temperature line. In contrast, others have a battery information check line (such as a non-native battery for warning alarms).


The lithium-ion battery is the battery + protection plate.


The third line will only appear on guard, and the battery will always only have two lines.


Lithium-ion batteries come in two types, notably 3.7V iron and aluminum nonphosphate, and can directly replace.

 

The substitution is straightforward (note the positive and negative poles) :

 

1: Remove the galvanic battery's packaging and then separate the protection plate from the battery with the electric soldering iron.

 

2. Remove the protection plate of the new battery and install the battery onto the old one.